‘Print mode not supported’ on HP printers
Why This message could have 2 reasons, either: a certain print mode built for a certain printer has been changed...
FAQ's
-
-
Océ Colorado PMM handling
The Océ Colorado Printer has new media handling functionalities not previously seen. Therefore we have adapted the Calibrator to support... -
Separation and Black generation
The K in CMYK stands for “Key”, NOT black as many might have you believe. The Key plate, in traditional colour... -
Custom Job Labels
Job Labels Layout has default 4 labels: You can add custom labels to this list. Labels can either be generated... -
Océ Colorado 1640: managing media and print mode settings
Océ have decided upon an architecture where the print and media settings are stored in the printer profile. Consequently, any... -
Océ Colorado 1640: tension bar settings
This document describes how the tension bar settings are defined and what changes are allowed. Tension bar settings in Media... -
Calibrator: PMM Quality Settings
What In the bottom right section of a PMM there is an option to select the quality. [Calibrator -> select... -
Textile Step and Repeat: faster ripping and smaller meta data: setup
From V6.1.0: the speed of RIP-ing when Textile Step & Repeat is used has been drastically reduced: if there are... -
PrintStation upgrade V5 to V6
PrintStation -
PrintStation V5 to V6 upgrade
When the settings in PrintStation are completed for a certain printer a shortcut is created on the desktop. When... -
Graphtec FC8000 driver settings and workings
This document explains some functionalities of the Graphtec cutter driver and its workings Settings change for PrintFactory V6 The Graphtec... -
Error 2738 during install on Win
Question: I got an error while trying to install software on my Windows 7 computer. This is the error message:... -
Creating a Printer
In the RIP component of PrintFactory, you can set up your printers and cutting devices. Every output device is represented by a... -
How to send cut data file only
The procedure to only send cut data from Editor is as follows: Select “None” as printer Select the cutter Open... -
Cutting Kiss and Flex paths in one file on Summa S2 Series
What: This procedure explains how to set up the Summa S2 Class cutter to Kiss cut and Flex cut in... -
Mimaki UCJV300 5 Layer Printing
What? The Mimaki UCJV300 offers a 5 layer printing mode by overprinting a total of 5 layers of color +... -
PrintStation Upgrade from V6.2 to V6.3
PrintStation has been upgraded in V6.3. This requires a change in how PrintStation should be created at the first installation.... -
Apple check for malicious software
When installing or upgrading on Apple’s latest OS, it is possible that a message pops up warning you that Apple... -
Textile Step and Repeat
What? In version 6.3.3 we have changed the way the RIP handles textile step and repeated files received from Editor...