Epson EMX
What: Epson provides EMX profiles for their printer containing the settings and ICC profiles for many Media & Mode combinations...
Calibrator
-
-
ICC Variants
ICC based printer profiles (PMM) are default created with 2 variants: Colorimetric : paper relative colorimetric conversion from the normalisation... -
Barbieri Connection issues on MacOS X
Both on Mac and Win, the Barbieri spectometers need the manufacturer driver to be installed. This can be found at: http://www.profile-xpert.com/driver/index.htm -
Import and Export Profiles
Import a profile Proceed as follows: In the calibrator, Click Import. Navigate through your finder to the Profile/ Profiles required. Click... -
Ultra Violet (UV) and Optical Brightening Agents (OBA) with M0,1,2,3 Measuring Modes
M0, M1, M2, M3 measuring mode settings These ‘M’ modes have been defined in order to standardise the illumination conditions... -
HP Latex Profiling with the built in Spectrophotometer
Please be advised that no matter what RIP is driving the HPL365 the pre-set needs to be built on the... -
Eye-One / i1 / i1 iO Setup
Connection issues The i1 devices are known to be sensitive to low powered USB ports. Those port are common on MacBook and... -
Gretag iCColor Support
Gretag iCColor support has been discontinued The Gretag iCColor is supported on the following platforms: Macintosh PowerPC Windows XP /... -
HP Latex Build-in Measurement
The HP Latex series offer an build-in measurement device for all supplied models. There is a difference in use and... -
MX Visual Evaluation Test Form
At the end of the wizard to create a profile the option is offered to print the Visual Evaluation Test... -
Reference Profile Location
Windows: C:\WINDOWS\system32\spool\drivers\color\ MacOS: Home directory: ~/Library/ColorSync/Profiles or Root: /Library/ColorSync/Profiles -
Calibrating Printers
Preparing the printer, media and spectrophotometer Preparatory steps Prepare the following items: Printer, of the target model, and connected to... -
Profiling Wizard
Ink Bleeding Previous steps Make sure you have completed the previous steps: Specifying the printer profile name and info Printer... -
Dot Gain & Gray Correction Curve
About Dot Gain correction Dot gain correction allows for 2 uses: Compensate for dot gain curves in the imagesetter or... -
About Calibrator and Printer Profiles (PMM)
About printer profiles PrintFactory controls the output of inkjet printers through the use of printer profiles or PMMs (Print Media Mode). Printer... -
Regenerating ICC Profiles
About regenerating ICC profiles You can regenerate the ICC profile if you wish to recalculate it with different settings without having... -
Spot Colors
A key feature in PrintFactory is the precise spot color processing. In digital production, spot colors such as Pantone™, DIC or HKS can... -
Spot Color Tuning
Spot colors can be manually fine-tuned to meet special requirements or to improve the visual match. The spot color tuning is... -
Installing the spectrophotometer
When do you need a spectrophotometer? You need spectrophotometers to perform the following tasks: Creating printer profiles Relinearizing printers that... -
Setting up the spectrophotometer
Configure and calibrate If you use a spectrophotometer with PrintFactory Calibrator, you need to configure and calibrate it on the PrintFactory computer. Configuring the spectrophotometer is...